|Dimensions with locking arms||1040 x 640 x 683mm|
|Packaging and weight||1140 x 753 x 355mm (55,9kg)|
|Supply DC voltage||12 ± 1.2 VDC
Power supply (optional): 80 W, 12 V/ 6,67 A)
|Through frequency (single passage mode||30 people/min|
|Through frequency (free passage mode||60 people/min|
|Width of the through zone||500mm|
|RFID||Optional: 2 HF RFID Reader (NXP MIFARE Ultralight, Classic 1K, 4K)|
|Controlled passage directions||Bidirectional|
|Temperature||+1°C to +40°C|
|Optionen||mechanical anti-panic folding arms|
The three-armed turnstile ID GATE 6500 from iDTRONIC is the basis type of iDTRONIC´s turnstiles which was designed for indoor application.
The housing of the ID GATE 6500 is made of powder-coated steel in dark grey. The barrier arms consist of glossy stainless steel.
The RFID reader, which will be needed for the access control, can be purchased by request. Therefore you save the cost of a separate purchase and the effort to install the reader.
The LED illumination of the turnstile shows clearly if the person is authorized or not. Green light stands for an authorized
person while the red stop signal indicates that the turnstile is closed and going through the control stays refused.
Thanks to the standard scope of delivery provided remote control the ID GATE 6500 can easily been unlocked from the reception.
The turnstile ID GATE 6500 will be equipped with an emergency key. Optional the ID GATE 6500 can be equipped with mechanical anti-panic folding arms. Therefore the arms can only be folded down manually.
|Indoor swimming pools, Water parks, Theme parks, Wellness resort|