ID GATE 4000
Full-Height Turnstile, perfect for Access Control in Swimming Areas and Leisure Facilities
- Full height turnstile for maximum safety and protection against climbing over
- Robust aluminium housing with a corrosion-resistant polymer coating (suitable for indoor & outdoor use)
- Built-in LED indicators for passage clearance
- Motorised or mechanical version
- Wired remote control included allowing access from a distance
- Optional canopy and foundation frame (on request)
|Dimensions||1800 x 1600 x 2325 mm|
|Width of the through zone||755 mm|
|Material||Housing: Alluminium Polymer Layer|
|Power consumption||4.5 A|
|Controlled passage directions||Bidirectional|
|Through put rate||
|Temperature||-40°C to +55°C|
|Class||IP54 (protection against dust and spray water)|
Robust Design for Outdoor Usage
The robust welded aluminium structure with polymer layer and powder coating with mica-iron effect offers highest reliability and resistance to vandalism. It ensures stable operation of the turnstile even in harsh environments and effective electrical insulation and improved impact resistance.
Thanks to IP54 Protection Class it is suitable for both indoor and outdoor use at ambient temperatures from -40 °C to + 55 °C.
The RTD-15 Full-Height Gate is available as motorized (RTD-15.1) and mechanical version (RTD-15.2).
The mechanical version can be unlocked with a key.
The turnstile offers enough space for your passenger traffic with a passage width of 755 mm.
Optimal Performance with high User Density
The turnstile has a throughput rate of 20 persons per minute in single passage mode. In addition, is bidirctional passing possible.
The mean time to failure is 2 000 000 passages and the turnstile has a mean lifetime of 8 years.
The turnstile is equipped with bright LED indicators that show whether access is granted or denied.
The high beam indicators can be connected optionally.
Perfectly prepared for Emergency Situations
Two built-in mechanical release locks, one for each passage direction, allow unlocking the turnstile
with a key for free passage in case of power failure or necessity to override an access control system ACS.
When operating under an access control system (ACS), the turnstile can support pulse and potential control modes.
The turnstile outputs have galvanic isolation. The logic board is protected against short circuit, overload and polarity inversion.
he RTD-15 can be operated from the remote control panel included in a standard delivery set or a
wireless remote control (optionally) and can be easily integrated into most access control systems.
The operating modes are set up independently for each passage direction.
Optimum protection in changing weather conditions
For protection against downfalls and climbing over, the turnstile may be supplied with
a protective canopy to be joined into a single portal structure with the turnstile.
A number of RTD-15 turnstiles with canopies can be mounted in one row. Special couplings have
been designed to provide reliable joining of two or more canopies. This design also allows cable
laying through all the top channels of the lined turnstiles, which makes the installation considerably easier.
By means of an extra foundation frame RF01, the turnstile can even be installed on an unstable ground.
- Turnstile with internal Electronics
- Remote-Control Panel
- 2 Halogen Spotlights
- Anti-backup device
- 2 mechanical Release Locks